Sidebar

How can I update my WiFi PODZ?

How can I update my WiFi PODZ?

*Make sure first the iON camera is up to date. To do so connect camera to PC, open iON program and select firmware check. If an update is needed, please perform the update first.

*Insert WiFi PODz in iON camera and secure PODz, but do not turn the WiFi PODz.

*Take 2 or 3 pictures. In order for the camera update to work a few photos must be taken first.

*Power WiFi PODz. WiFi PODz should be blinking indicating ready to connect.

*Connect to iON camera using your android or apple device and select WIFIPODZ. Enter password 123456789 to connect.

*Open iON Camera App from your device. You should get a message that a new firmware update is available for the WiFi PODz.

*After download, power off iON Camera and close your iON app from your smart device. From your android or apple device you must also turn off your WiFi.

*Power on your iON camera and then your iON WiFi PODz. *This is an important step. Your iON WiFi PODz LED will be solid blue for about 30 seconds, then it will blink 2 to 5 times and LED becomes solid blue again. Do not interrupt; the LED will be solid for another 30 seconds and will power off on its own. Please note the iON Camera will stay on.

*Press the iON WiFi PODz button once and the WiFi PODz will not power on. Pressed the iON WiFi PODz button a second time and the WiFi PODz will power on. The update is now complete.

*Enable your WiFi on your android or apple device and connect using the iON app.



« | »